TMS125 低煙無鹵阻燃聚烯烴熱收縮標識套管
應用
低煙無鹵阻燃聚烯烴熱收縮標識套管是專為電線電纜標識而設計，由輻照交聯低煙無鹵阻燃聚烯烴材質制成，具有優異的電氣性能、物理性能、化學性能和打印性能，可以方便地用標識打印直接打印，標識持久。不僅符合ROHS和REACH環保指令，而且符合IEC61249-2-21、歐盟2002/72/EC等環保標準的要求。
特性
-
收縮比：3:1，2:1
-
柔軟、低煙無鹵阻燃
-
可以方便打印
-
優異的打印性能，持久標識，符合SAE AS81531的打印標識要求
-
優異的電絕緣性能、物理性能和化學性能
-
符合ROHS、REACH環保規范
顏色
-
標準顏色：白色、黃色
-
其他顏色可定制
操作溫度范圍
-
連續使用溫度范圍：-55℃～125℃
-
**起始收縮溫度：70℃
-
**收縮溫度：110℃
符合標準
-
SAE AS 81561,MIL-STD-202
-
UL224 125℃ 600V
性能指標
|
性能 |
指標要求 |
測試方法 |
典型值 |
|
縱向收縮率 |
≤10％ |
ASTM D 2671 |
≤5％ |
|
抗張強度 |
10.4MPa min |
ASTM D 638 |
≥12MPa |
|
斷裂伸長率 |
200％ min |
ASTM D 638 |
≥300％ |
|
老化后斷裂伸長率 (熱老化158℃,168小時) |
100％ min |
ASTM D 638 |
≥200％ |
|
熱沖擊
|
無裂紋 |
ASTM D 2671 |
無裂紋 |
|
低溫柔軟性 （-55℃，4小時） |
無裂紋 |
ASTM D 2671 |
無裂紋 |
|
絕緣耐壓和擊穿 |
2500V,60sec,不擊穿 |
ASTM D 2671 |
不擊穿 |
|
擊穿強度 |
19.7 KV/mm min |
ASTM D 2671 |
≥20KV/mm |
|
體積電阻率 |
1014??cm min |
ASTM D 876 |
≥1014??cm |
|
腐蝕性 |
無腐蝕 |
ASTM D 2671 |
無腐蝕 |
|
阻燃性 |
1分鐘內自熄 |
ASTM D 2671 |
通過 |
|
打印性能 |
50次橡皮擦，可辨認 30次來回擦，可辨認 |
SAE SA81531 MIL-STD-202 |
通過 |
|
抗液體 （23℃，24小時） |
打印吸識別 |
SAE AS81531 |
通過 |
規格尺寸
|
規格 |
收縮前（mm） |
收縮后(mm) |
適用線纜范圍（mm） |
|
|
英制 |
公制 |
內徑(min) |
內徑(max) |
|
|
3:1 |
||||
|
3/32 |
Ф2.4 |
2.4 |
0.8 |
0.9~2.0 |
|
1/8 |
Ф3.2 |
3.2 |
1.1 |
1.1~2.7 |
|
3/16 |
Ф4.8 |
4.8 |
1.6 |
1.8~4.1 |
|
1/4 |
Ф6.4 |
6.4 |
2.1 |
2.3~8.1 |
|
3/8 |
Ф9.5 |
9.5 |
3.2 |
3.5~8.1 |
|
1/2 |
Ф12.7 |
12.7 |
4.2 |
4.6~10.8 |
|
3/4 |
Ф19.1 |
19.1 |
6.3 |
7.0~16.3 |
|
1 |
Ф25.4 |
25.4 |
8.5 |
9.3~21.6 |
|
2:1 |
||||
|
3/32 |
Ф2.4 |
2.4 |
1.2 |
1.3~2.3 |
|
1/8 |
Ф3.2 |
3.2 |
1.6 |
1.7~3.1 |
|
3/16 |
Ф4.8 |
4.8 |
2.4 |
2.5~4.7 |
|
1/4 |
Ф6.4 |
6.4 |
3.2 |
3.3~6.3 |
|
3/8 |
Ф9.5 |
9.5 |
4.8 |
4.9~9.0 |
|
1/2 |
Ф12.7 |
12.7 |
6.4 |
6.6~12.0 |
|
3/4 |
Ф19.1 |
19.1 |
9.5 |
10.0~18.5 |
|
1 |
Ф25.4 |
25.4 |
12.7 |
13.0~24.5 |
|
11/2 |
Ф38.1 |
38.1 |
19.1 |
21.0~37.0 |
|
2 |
Ф50.8 |
50.8 |
25.4 |
27.0~48.0 |
其他規格尺寸可定制
TMS125 Halogen Free Heat Shrinkable Polyolefin Identification Sleeve
Application
Special designed to meet the requiremwnts of identification of wire and cables. It is made of halogen-free flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. It can be printed by market printed with permanent identification. TMS125 meets the requirement of ROHS, REACH, IEC61249-2-21 and EU2002/72/EC standards.
Characteristics
-
Shrink ratio: 3:1, 2:1
-
Flexible, Halogen-free flame-retardant.
-
Easy to be print.
-
Excellent printing property, permanent identification, SAE AS81531 applicable.
-
Excellent electrical, physical, chemical and printing properties.
-
ROHS and REACH compliant.
Color
-
Standard color: White, yellow
-
Other colors are available upon request.
Operating Temperature Range
-
Operating temperature: -55℃～125℃
-
Minimum shrink temperature: 70℃
-
Minimum fully recovery temperature: 110℃
Approvals
-
SAE AS 81561,MIL-STD-202
-
UL224 125℃ 600V
Property
|
Property |
Requirement |
Test method |
Typical data |
|
Longitudinal shrinkage |
≤10％ |
ASTM D 2671 |
≤5％ |
|
Tensile strength |
10.4MPa min |
ASTM D 638 |
≥12MPa |
|
Elongation at break |
200％ min |
ASTM D 638 |
≥300％ |
|
Elongation after aging （158℃,168hrs） |
100％ min |
ASTM D 638 |
≥200％ |
|
Heat shock
|
No crack |
ASTM D 2671 |
No crack |
|
Low-temperature flexibility（-55℃,4hrs） |
No crack |
ASTM D 2671 |
No crack |
|
Dielectric voltage withstand |
2500V,60sec,no breakdown |
ASTM D 2671 |
No breakdown |
|
Dielectric strength |
19.7 KV/mm min |
ASTM D 2671 |
≥20KV/mm |
|
Volume resistivity |
1014??cm min |
ASTM D 876 |
≥1014??cm |
|
Corrosion |
No corrosion |
ASTM D 2671 |
No corrosion |
|
Flammability |
Self-extinguishing within one second |
ASTM D 2671 |
Pass |
|
Printing performance |
50rubs, legible 30strokes, legible |
SAE SA81531 MIL-STD-202 |
Pass |
|
Fluid resistance（23℃，24hrs） |
Printing legible |
SAE AS81531 |
Pass |
Sizes
|
Size |
As supplied (mm) |
After recovered(mm) |
Recommended use range （mm） |
|
|
inch |
mm |
Inside diameter(min) |
Inside diameter (max) |
|
|
3:1 |
||||
|
3/32 |
Ф2.4 |
2.4 |
0.8 |
0.9~2.0 |
|
1/8 |
Ф3.2 |
3.2 |
1.1 |
1.1~2.7 |
|
3/16 |
Ф4.8 |
4.8 |
1.6 |
1.8~4.1 |
|
1/4 |
Ф6.4 |
6.4 |
2.1 |
2.3~8.1 |
|
3/8 |
Ф9.5 |
9.5 |
3.2 |
3.5~8.1 |
|
1/2 |
Ф12.7 |
12.7 |
4.2 |
4.6~10.8 |
|
3/4 |
Ф19.1 |
19.1 |
6.3 |
7.0~16.3 |
|
1 |
Ф25.4 |
25.4 |
8.5 |
9.3~21.6 |
|
2:1 |
||||
|
3/32 |
Ф2.4 |
2.4 |
1.2 |
1.3~2.3 |
|
1/8 |
Ф3.2 |
3.2 |
1.6 |
1.7~3.1 |
|
3/16 |
Ф4.8 |
4.8 |
2.4 |
2.5~4.7 |
|
1/4 |
Ф6.4 |
6.4 |
3.2 |
3.3~6.3 |
|
3/8 |
Ф9.5 |
9.5 |
4.8 |
4.9~9.0 |
|
1/2 |
Ф12.7 |
12.7 |
6.4 |
6.6~12.0 |
|
3/4 |
Ф19.1 |
19.1 |
9.5 |
10.0~18.5 |
|
1 |
Ф25.4 |
25.4 |
12.7 |
13.0~24.5 |
|
11/2 |
Ф38.1 |
38.1 |
19.1 |
21.0~37.0 |
|
2 |
Ф50.8 |
50.8 |
25.4 |
27.0~48.0 |
Other sizes are available upon request.
|
